AN_221, Adding An ADC To The Raspberry Pi

参考设计属于: Future Technology Devices International Limited

AN_221, Adding An ADC To The Raspberry Pi.This reference design demonstrates how the Raspberry Pi can be integrated with the RPi_HUB Module and an external analog to digital converter (ADC)

PDF下载
最新版本供应商参考设计
(外部链接)

参考设计

UMFT201XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT201XQ Full Speed USB 2.0 Interface

UMFT311EV, USB Android Host Development Module based on FT311D

V2-EVAL-EXT48, VNC2 Daughter Board Module with 48-pin QFN VNC2 device for the FT4232H USB to UART Bridge

V2-EVAL-EXT32, VNC2 Daughter Board Module with 32-pin QFN VNC2 device for the FT4232H USB to UART Bridge

UMFT240XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT240XQ Full Speed USB 2.0 Interface

UMFT230XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT230XQ Full Speed USB 2.0 Interface

UMFT221XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT221XQ Full Speed USB 2.0 Interface

UMFT220XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT220XQ Full Speed USB 2.0 Interface

UB232R, USB Mini-B FT232R Evaluation Board, serial development module in the FTDI product range

UM232R, USB - Serial UART Development Module for FT232RL USB-to-UART Interface

VDIP1, Development Module for Vinculum VNC1L Module

VNCLO-MB1A, Vinco Motherboard Development Module based on the Vinculum II, VNC2 dual USB Host/Slave IC

UM245R, USB - Parallel FIFO Development Module based on FT245RL

UMFT230XA-02, USB to 4-bit SPI/FT1248 Development Module for the FT230XQ Full Speed USB 2.0 Interface

V2-EVAL, Vinculum II Evaluation Board for the FT4232H USB to UART Bridge

UMFT201XA-02, USB to 4-bit SPI/FT1248 Development Module for the FT201XQ Full Speed USB 2.0 Interface

MORPH-IC-II, Development Module is a fully backward compatible with the MorphIC-1K FPGA and USB-to-UART module used in medium scale production

UMFT231XC-01, Development Module for UMFT231XC USB to UART with Battery Charger Support

UMFT231XA-01, USB to 4-bit SPI/FT1248 Development Module for the FT231XQ Full Speed USB 2.0 Interface

V2DIP1-32, Development Module is designed to allow rapid development of designs using the VNC2-32Q VNC2 MCU IC

V2DIP1-48, Development Module for VNC2-48Q Embedded Dual USB Host Controller

V2DIP2-48, VNC2-48 Development Module for the VNC2-48Q Embedded Dual USB Host Controller

V2DIP2-32, Development Module for VNC2-32Q MCU

UMFT601A, FIFO to USB 3.0 Bridge Evaluation Board with 32-Bit FIFO bus, HSMC connector for interfacing the FT601Q USB Interface IC

UMFT601X, FIFO to USB 3.0 Bridge Evaluation Board with 32-Bit FIFO bus, FMC (Low Pin Count) connector for interfacing the FT601Q USB Interface IC

AN_221, Adding An ADC To The Raspberry Pi

参考设计

参考设计

参考设计相关元器件