Sign in to ask questions about the Bosch CJ125 datasheet using AI. Get instant answers about specifications, features, and technical details, ideal for finding information in larger documents.
Sign In to ChatWidest selection of semiconductors and electronic components in stock and ready to ship ™
Bosch CJ125 technical specifications.
| Supply Voltage UB (Maximum Rating) | -0.3 to 35V |
| Supply Voltage VCC (Maximum Rating) | -0.3 to 5.5V |
| Junction Temperature (Maximum Rating) | -40 to 150°C |
| Storage Temperature (Maximum Rating) | -40 to 150°C |
| Ambient Temperature (SOIC/PLCC, Maximum Rating) | -40 to 110°C |
| Ambient Temperature (max 50h, Maximum Rating) | -40 to 125°C |
| Ambient Temperature (LQFP max 50h, Maximum Rating) | 140°C |
| Maximum Allowed Voltages for Pins (Vx, Maximum Rating) | -0.3 to Vvcc + 0.3V |
| Allowed Current IDIAHD (ext. resistor 6.8 kΩ, Maximum Rating) | -1 to 10mA |
| Maximum Allowed Voltages (no destruction with ISO-pulses, Maximum Rating) | -0.3 to 28V |
| Offset between GND and GNDS (AVGND, Maximum Rating) | -0.25 to 0.25V |
| Offset between VCC and VCCS (AVVCC, Maximum Rating) | -0.25 to 0.25V |
| ESD (Human Body Model, Maximum Rating) | -2 to 2kV |
| Power Supply VUB (Electrical Characteristic) | 9 to 18V |
| Operating Range VCC (Electrical Characteristic) | 4.75 to 5.25V |
| Current Consumption Ivcc (Electrical Characteristic) | 76mA |
| Current Consumption Ivccs (Electrical Characteristic) | 4mA |
| Pump Current Control Offset Voltage Voff (Electrical Characteristic) | -10 to 10mV |
| Pump Current Control Input Current lup, UN (Electrical Characteristic) | -1 to 1µA |
| Pump Current Control Input Offset Current loff (Electrical Characteristic) | -1 to 1µA |
| Pump Current Control Output Current Source Condition (Electrical Characteristic) | 10 to 30mA |
| Pump Current Control Output Current Sink Condition (Electrical Characteristic) | 10 to 30mA |
| Pump Current Control No Output Current (Electrical Characteristic) | -10 to 10µA |
| Pump Current Sense Amplifier Input Current IP (Electrical Characteristic) | -1 to 1µA |
| Pump Current Sense Amplifier Amplification Ao (SPI-bit VL = 1, Electrical Characteristic) | 16.62 to 17.24 |
| Pump Current Sense Amplifier Amplification Ao (SPI-bit VL = 0, Electrical Characteristic) | 7.82 to 8.15 |
| Pump Current Sense Amplifier Common Mode Rejection Ratio CMRR-1 (Electrical Characteristic) | 12mV/V |
| Pump Current Sense Amplifier Output Voltage Swing VUA (Electrical Characteristic) | 0.20 to Vvcc - 0.18V |
| Pump Current Sense Amplifier Output Voltage Adjustment VFR/VVCC (Electrical Characteristic) | 0.285 to 0.315 |
| Pump Current Sense Amplifier Output Error Offset Adjust (Electrical Characteristic) | -3 to 3mV |
| Virtual Ground Voltage Source Output Current Operating Range IVM (Electrical Characteristic) | -IIA - 2 to -IIA + 2mA |
| Virtual Ground Voltage Source Output Voltage Ratio VVM/VVCC (Electrical Characteristic) | 0.48 to 0.52 |
| Virtual Ground Voltage Source Output Current Operating Range IUS (Electrical Characteristic) | -0.4 to 0.4mA |
| Oscillator Frequency f (Electrical Characteristic) | 2.49 to 3.51kHz |
| Measurement Current for Ri Output Resistor of Push-Pull-Stage R (Electrical Characteristic) | 5 to 200Ω |
| Ri Amplifier Leakage Current When Switch Is Open ILEAK (Electrical Characteristic) | -500 to 500nA |
| Ri Amplifier Amplification Ao (Electrical Characteristic) | 15 to 16.3 |
| Ri Amplifier Ron for a Switch (Electrical Characteristic) | 200Ω |
| Ri Amplifier Input Voltage Range at CM, UN and RS VRI (Electrical Characteristic) | 2 to Vvcc - 1.1V |
| Ri Amplifier Output Voltage Range VUR (Electrical Characteristic) | 0.06 Vvcc to Vvcc - 0.2V |
| Ri Amplifier Zero Point for Output Trace VUR/VVCC (Electrical Characteristic) | 0.05 to 0.063 |
| Pump Reference Current Range (Electrical Characteristic) | -1 - lun to 150µA |
| Diagnosis of Sensor Lines Short Circuit to Ground VVM / VVCC (Electrical Characteristic) | 0.35 to 0.45 |
| Diagnosis of Sensor Lines Short Circuit to Vbat VVM / VVCC (Electrical Characteristic) | 0.55 to 0.65 |
| Diagnosis of Sensor Lines Short Circuit to Ground VUN / VVCC (Electrical Characteristic) | 0.30 to 0.40 |
| Diagnosis of Sensor Lines Short Circuit to Vbat VUN / VVCC (Electrical Characteristic) | 0.72 to 0.88 |
| Diagnosis of Sensor Lines Short Circuit to Ground VIA, IP (Electrical Characteristic) | 0.3 to 1.5V |
| Diagnosis of Sensor Lines Short Circuit to Vbat VIA (Electrical Characteristic) | Vvcc to Vvcc + 2V |
| Diagnosis of External Heater Low Level VDIAHG (Electrical Characteristic) | -0.3 to 0.3 VvccV |
| Diagnosis of External Heater High Level VDIAHG (Electrical Characteristic) | 0.7 Vvcc to Vvcc + 0.3V |
| Diagnosis of External Heater Input Current IDIAHG (Electrical Characteristic) | -1 to 1µA |
| Diagnosis of External Heater Short Circuit to Ground IDIAHD (DIAHG = low, Electrical Characteristic) | -1000 to -350µA |
| Diagnosis of External Heater Short Circuit to Vbat IDIAHD (DIAHG = high, Electrical Characteristic) | -100 to 10000µA |
| Diagnosis of External Heater Open Load IDIAHD (DIAHG = low, Electrical Characteristic) | -100 to 100µA |
| Diagnosis of External Heater No Failure IDIAHD (DIAHG = high, Electrical Characteristic) | -1000 to -350µA |
| Diagnosis of External Heater No Failure IDIAHD (DIAHG = low, Electrical Characteristic) | 350 to 10000µA |
| Diagnosis of External Heater Filter Time (Electrical Characteristic) | 30/32 to 32/32 |
| SPI Data Rate (Electrical Characteristic) | 2Mbaud |
| SPI Bit-frame (Electrical Characteristic) | 16bit |
| SPI Number of Read/Write Commands (Electrical Characteristic) | 6 |
| SPI Number of Registers (Electrical Characteristic) | 4 |
| Feature | Currents and Voltages (box 1) |
| Feature | Pump current control (boxes 2a to 2b) |
| Feature | Pump current sense amplifier (boxes 3a to 3b) |
| Feature | Lambda output amplifier (box 4) |
| Feature | Virtual ground voltage source for sensor and pump current control (box 5) |
| Feature | Nernst cell reference voltage source (box 6) |
| Feature | Oscillator (box 7) |
| Feature | Circuit for Ri or Rical measurement (boxes 8a to 8d) |
| Feature | Diagnostic of sensor lines (box 9) |
| Feature | Diagnostic of external heater (box 10) |
| Feature | Serial-Peripheral-Interface (SPI; box 11) |
| Feature | Programmable reference pumping currents (box 12) |
| Feature | Suppression of Ri-measurement (box 13) |
| REACH | Compliant |
| Military Spec | False |
| Quality Management System | QS9000 certified |
| Quality Management System | ISO/TS16949 certified |
Download the complete datasheet for Bosch CJ125 to view detailed technical specifications.
The embedded preview will load automatically when this section scrolls into view.
